Materials: 304 Stainless Steel
Surface: Brushed Stainless Steel
Dimensions: 9.1*4.7*1.7 inches/23*12*4.4cm
Maximum weight supported: 22lbs/10kg
Holds a decent amount of shampoo, conditioner, body wash and other bathroom necessities
When you are ready to take down or move it, it comes off cleanly with no holes.
Lets you fearlessly install it without nails or tools
Helps to keep your walls looking beautiful
Please note: Do not use on rough or non-stick surfaces such as textured walls, painted walls or wallpaper.
A. Installing with adhesive hooks
1. Wipe the wall with a clean cloth;
2. Attach the shelf to those adhesive hooks and fasten the bolts and nuts.
3. Tear off the protective film of the 3M adhesive tape;
4. Press the adhesive hooks to the desired positions of the wall;
5. Remove the shelf and press the center of each hook firmly and keep firm pressure for about 15 seconds.
6. Wait at least 24 hours before attaching the shelf to the hooks again.
B. Installing with screws
1. Measure off;
2. Mark the two anchor locations;
3. Drill out the two wall anchors;
4. Tap them in and then drill in the two screws.
1 x JSVER Bathroom Shelf
1 x User Manual
2 x Adhesive Hooks